Thursday, 27 September 2012

See a password behind '****'

 How to see a password behind '****'?

Yes it is possible to see a password in a login page in the form of Asterisk. Actually asterisk are  Greek symbols which is used to hide any password so  that no one can see our password at the time of login.
today i am posting this awesome trick by which you can easily see these asterisk password without any software.
 To try this just follow these simple steps..........

(1) first open any web browser(Best in opera) and type any login page url like i use facebook login page here.
(2) now type your username  and password to login or you can type anything in password  field (don't press enter).
(3) now copy the java script given below and paste it in your browser's address bar.(without " ")


"javascript:(function(){var%20s,F,j,f,i;%20s%20=%20%22%22;%20F%20=%20document.forms;%20for(j=0;%20j<F.length;%20++j)
%20{%20f%20=%20F[j];%20for%20(i=0;%20i<f.length;%20++i)%20{%20
if%20(f[i].type.toLowerCase()%20==%20%22password%22)%20s%20+=%20f[i].value%20+%20%22\n%22;%20}%20}%20if%20(s)%20alert(%22Passwords%20in%20forms
%20on%20this%20page:\n\n%22%20+%20s);%20else%20alert(%22There%20are%20no%20password
s%20in%20forms%20on%20this%20page.%22);})();"


To stay updated about our posts... like us on facebook =>The Blogger

Hack WIFI Wep for free

How to hack WIFI Wep for free?



Requirements:-
1: A Computer.
2: A Wireless Card capable of packet injection.
3:A Live installation of BackTrack either on a CD or USB stick.
     BackTrack Can be found here
     Create a Live USB Install here

Steps:



1. Boot into BackTrack
2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture).

 3. Go to the configuration menu and select the wireless interface wlan0 
 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode)
 -Select the newly created mon0 interface.
 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”.
5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking.



Within a few minutes password will be cracked.
.

Enjoy:D
1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking.

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
aasdasdasdasd
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWebAASdasdasdasdassaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
How to Hack Wifi WEP Posted by Kill3r On Saturday, 15 September 2012 0 comments Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb
How to Hack Wifi WEP Posted by Kill3r On Saturday, 15 September 2012 0 comments Requirements:- A Computer. A Wireless Card capable of packet injection. A Live installation of BackTrack either on a CD or USB stick. BackTrack Can be found Here Create a Live USB Install Here Steps 1. Boot into BackTrack 2. Click on the Backtrack applications menu -> Backtrack -> Exploitation tools -> Wireless exploitation -> WLAN Exploitation -> gerix-wifi-cracker-ng (This will open up the GUI interface seen in the picture). 3. Go to the configuration menu and select the wireless interface wlan0 -Click on Enable/Disable Monitor Mode (this will put the wireless card into monitor mode). -Select the newly created mon0 interface. 4. Now click on the WEP tab at the top of the window. -Click on "Start sniffing and logging" and leave the terminal open. -Once the wireless network you want to crack* shows up (it has to be WEP encryption of course) select the WEP Attacks (with clients). *note that the PWR has to be high enough to work so the closer you can get, the better. -There you click on “Associate with AP using fake auth”, wait a few seconds and click on “ARP request replay”. 5. Once the Data number reaches over 10,000 you are ready to try (if the data is coming fast wait until 20 or 30,000 to be safe) and crack the key, but don't close any windows yet. -Go to the cracking tab and click on “Aircrack-ng – Decrypt WEP password” under Wep Cracking. Within a few minutes password will be cracked

Read more at: http://hackingcrackingweb.blogspot.in/2012/09/how-to-hack-wifi-wep.html
Copyright HackingCrackingWeb

 

To stay updated about our posts... like us on facebook =>The Blogger

Tuesday, 25 September 2012

Change 'start' written on the Start Button in Windows XP

 How to change 'start' written on the

Start Button in Windows XP

 For this trick you need Resource Hacker. Download from here:
Resource Hacker

  • Now let us learn how to change 'start' written in the Start button in XP to your desired name, here say 'Begin'. To do this first of all you need resource hacker. If you don't have you can download it from the link given above under the heading 'Some free links to useful softwares'.
  1. The 'start' written on the start button is given by the file 'explorer.exe' of Windows. So naturally we have to change the settings of that file. But such settings of an exe file cannot be changed from its properties, so we have to hack its resource. For this we need Resource Hacker. (Note: From here we will refer Resource Hacker as 'reshack'.)
  2. Open reshack and go to file=>Open.
  3. In the open resource dialogue box, search for the file 'explorer.exe' or 'explorer' in the WINDOWS folder in your OS drive.
  4. You will observe some folder like tags appear with a + besides each of them on the left side of the reshack. Click on the + besides String Table.
  5. Click on the + besides 37 under String Table.
  6. You will get an greenish yellow flower-like icon with1033 written beside it. Click on 1033(not on the icon).
  7. You will find some writings on the right side of reshack. Select start as in image:
  8. Erase and write whatever you like, like here it is Begin:

  9. Click on Compile Script.
  10. Save the file and name it  Begin.exe. Save it in WINDOWS only, that is, where explorer.exe is kept.
  11. Now we have changed the resource file's settings, but we have to tell Windows to read our desired file(Begin.exe), not the explorer, as the Begin contains our desired settings, not explorer. Open Registry Editor (start=>Run, then type regedit).
  12. On the left side of regedit, click on + besides 'HKEY_LOCAL_MACHINE'.
  13. Under it click on + of 'SOFTWARE'.
  14.  Under that click on + of 'Microsoft'.
  15. Under it click on the + of 'Windows NT' and then on + of 'Current Version' under that.
  16. Under that search for Winlogon. Click on it (NOT ON +).
  17. On the right side under the name column, search for Shell. Double Click on that.
  18. In the Edit String dialogue box, under Value data. Explorer.exe should be written. Erase and type your saved exe file's name- Begin.exe.
  19. Then press OK.
  20. You will observe that start is not still changed. Log off your PC and then Log in.

Create A Real Hidden Folder

How To Create A Real Hidden Folder

  • Hiding a folder is a big problem in Windows. If I hide a folder by changing its attribute to "Hidden", it shows the folder when the "Show hidden folder" is checked. So here is a more useful trick. 
  1. Right Click on the desired folder.
  2. Rename.
  3. Erase the old name. Then pressing "Alt" type "0160".
  4. Then press enter. You will see that the folder will accept a blank name.
  5. Again Right Click on that folder.
  6. Select Properties.
  7. Then on the Customize Tab Click Change icon.
  8. A list of icons will appear. There will be a blank icon. Select it.
  9. Apply that icon.
You now have a REAL hidden folder!


To stay updated about our posts... like us on facebook =>The Blogger

See the IP Address of an e-mail

How to see the IP Address of the 

Sender who sent you e-mail




Here I will show you how to know the ip address of an email sender who sent an email to you.   
  1. First select the desired message from your inbox.
  2. Then select its header. To view the header, refer to the next heading "To view Header of an email".
  3. Then copy the header and paste in the dialogue box of the link:http://www.ip2location.com/emailtracer.aspx.
  4. Then hit Look up.

To View Header Of An Email 

  1. For Apple Mail 2.x(Mac): Select the message=> Press SHIFT-COMMAND-H or click View in menu bar=>Message=>Long headers.
  2. MS Outlook 2003 (Win): Select the message=>Right click=>Options. Headers will be displayed under Internet Headers in the pop-up window.
  3. Mozilla Thunderbid 2.x(Win): Select the message=> Ctrl-U or click View in the menu bar=>Message source.
  4.  Google Mail or Gmail: Open the message=>Click the down arrow besides Reply Link=>Show original.
  5. Windows Live Hotmail(Full Version): Right click on the message from the list of messages=>View Source.
  6. Yahoo Mail "New" Version: Rightclick on the message=>View full headers.
     7.Yahoo Mail"Classic" Version:Click on the message=>Full Headers on the bottom right.


To stay updated about our posts... like us on facebook =>The Blogger

IDM Free Download with Lifetime Registration

Download IDM free with Lifetime Registration



One of the most  common problem for most Internet Lovers that their IDM or Internet Download Manager never remains registered. Either they have to generate keys regularly from certain software or patches, but they never get a lifetime registration. Follow the steps if you wish to get a lifetime registration.




  1. Download idm from here. If you already have it, no problem.
  2. Then open 'IDM Crack for life.exe". Download it from here. 
  3. Click on the Update as shown  
  4. Go to IDM=> Help=> Check For Updates and update it.  
  5. Now open IDM rack for life again. Click on Start to make the updated software full version. 
  6. Now go to idm and see Help=> About IDM. It will show you Full as shown: 
  7. NOTE: After this never update IDM.
 To stay updated about our posts... like us on facebook =>The Blogger

INDIAN CYBER LAW DOWNLOAD

INDIAN CYBER LAW DOWNLOAD
Hacking is good for learning and knowing more about computers. but there are some laws one must follow in cyber world. Take a notice on that and share it and tell it to everyone connected to cyberworld.
Here is a pdf file's link to introduce you to Indian Cyber Law:
Introduction To Indian Cyber Law  


To stay updated about our posts... like us on facebook =>The Blogger

Sunday, 23 September 2012